I’ve been trying to figure out what to do with this room for just about 2 years now. It is starting to come together and I’m pretty excited. You can check out the previous incarnations of my plans for it here
, … oh and here
I love the mahogany walls. But they make this, hands down, the gloomiest room in the house. Those walls = love + gloom. SIGH.
To try and bring the 2+ years of over-thinking to a close, I did seek professional help whilst attending AB Chao
’s Dewit Design Camp
last year. AB very helpfully suggested sconces on either side of the sofa. And since this is going to be a man-cave no matter what, we decided it had at least be a very well-lit man-cave. I’ve been hunting and scheming ever since.
My first attempt back in January involved George Nelson Bubble lamps since I wanted maximum un-gloominess. They were pricey and very, very pretty but they were just… not…. right. Not enough light and weirdly too large for the room.
I think I knew all along. What I really wanted to try were silver-tipped bulbs in super-simple sconces. Like these
from The Brick House
. Or perhaps a bit more sleek and modern, like the Artemide Teti in black
, which turns out to be really hard to find.
I was worried that the sconces might just light up part of the walls, which absorb all light like giant, mahogany sponges. However, with DWR refund now in hand, I figured I could do this for much less than the Bubbles, and make them custom. Custom = so much more fun!
They may be wee, but they are bright. And I am quite happy with how they turned out. They fit in really well with the aesthetic of the room.
Here are the goods required:
|(Clockwise: cloth-covered cord, silver-tip bulb, offset plug, on-cord switch, back
plate, ceramic lightholder. Maybe $50 total. I think the bulb was the priciest thing here, at $8.)
The offset plugs are great for plugging in behind the sofa, allowing us to push the sofa up against the wall without worrying about cords getting mashed, as they do.
Of course, we triple-tested everything we wired using the multi-meter that Dave got for Christmas. Because we are NERDS.
I drilled through the lip of the metal back plate (the hole is visible at the bottom). With a regular drill, which required some patience/foolhardiness. I kept it as just a hole rather than a notch in the edge of the plate, for reasons I can’t quite explain. A notch would have made assembly SO much easier (no threading of cord through the hole).
Also, gloss spray paint on ceramic looks surprisingly OK:
- Paint. I used spray primer and then with gloss black spray paint.
- Drill holes in the metal back plates to accommodate cord.
- Mount back plates to wall. We used a laser level to make sure they lined up.
- Wire and assemble!*
I found most of my materials at the local hardware store and ordered some cloth-covered cord from Grand Brass. The silver-tipped bulbs are from 1000 Bulbs.
*Disclaimer: I am not an electrician so assemble at your own risk. The ceramic lightholders are meant to be mounted on top of electrical boxes. I can report no electrical fires so far.
As a fun bonus, in the process of putting up the lights, I mocked up my whole vision for the wall using masking tape. You really don’t need to see a picture of that since it was quite hastily done and very lopsided. Trust me. Upshot: Now I know that I want a 4×5’ piece of art. That should be both affordable and really easy to find, right?
While I ponder that, please enjoy this gratuitous shot of Winston appreciating the room, post-lamp-installation:
All photos by Karolina Buchner